Megaohmmeter Е6-40

      Price: 17250 rub. VAT included
      Verification: 1135 rub. VAT included

                       IN STOCK

  Number in the State Register of Measuring Instruments   64074-16 

Sphere of application

Megohmmeter E6-40 is a special type of ohmmeter used to measure the electrical resistance of insulators, diagnostics of insulating components of free-voltage electrical circuitry and equipment (including wires, cables, electrical motors and transformers). Additionally E6-40 is used to measure dielectric absorption ratio and polarization index of dielectric and it can perform measurements of 50 Hz AC external voltage with rms value from 50 to 600V on on measuring terminals.

Advantages

  • Comprehensive range of dielectric test voltage (100V-2500V). All parameters from Rules of Electrical Facilities Maintenance for megohmmeters is comprised.
  • It is used large-capacity and small size lithium iron phosphate battery.
  • Small relative measurement error of all operating ranges.
  • Small error limit of external voltage measurement
  • all-weather capability with extended range of surrounding air temperature, from - 30 °С to + 50 °С;
  • Possibility to charge a battery by universal battery charger with mini USB connector
  • Fast gaging speed of measurement coupled with high accuracy and high stability of operation is determined of special circuit design.
  • Compact useful measuring terminals have touch protection.
  • Handy, easy-to-use front control panel has large buttons with very good sense of touch, which allows work with gloved hands. The buttons of control panel can be felled much better than touch-sensitive buttons or fulminate buttons
  • There is a protection from accidental measuring start that considerable improves a comfort of operation with megohmmeter
  • Shatterproof BASF’s polycarbonate case lets us do not think all the time about it’s safety, because this case can sustain a huge load without failing.
  • It is possible to work with E6-40 by use of a strap. In this case the user has free hands.

General information about the device

Insulation-resistance meter Е6-40 is hand-held equipment. E6-40 has case is made of shatterproof BASF’s polycarbonate. In the closed position, the E6-40 has a protection class IP-67 that let use the device in harsh weather conditions that gives advantages for field services.

This device has hard image letter-digital LED indicator which allows seeing plainly indications on a panel with wide view angle even in low light conditions. LED indicators provides possibility work with the display at very low temperature (on to -40C).

E6-40 is powered from lithium iron phosphate battery with nominal voltage 7.2B and capacity 1100 mA/h. E6-40 has automatic intelligent Battery Operation and Maintenance control system. The system informs if it is necessary to charge the battery. Choice of this power supply system predicates with climatic category. Plug connection MiniUSB on the front panel is assigned for connection of battery charging set, during the battery charge measuring is not working. During the field tests this kind of battery shows a very good reliability. Fully-charged battery was good enough for 1000 measurements.

E6-40 perform measurements of resistances in the range from 0.1 MOhm to 250 GOhm with auto select of sub-range. Insulation test voltages (DC) are 100, 250, 500, 1000 и 2500 V. Additionally E6-40 is used to measure dielectric absorption ratio and polarization index of dielectric and it can perform measurements of 50 Hz AC external voltage with rms value from 50 to 600V on measuring terminals.

For ease hand-carry and using, megohmmeter equip with carrying strap “over the shoulder” and unclasp clamp for strap.

   Documentation

Megaommetr Е6-40 new prozrachnyi
МЕГАОММЕТР Е6-40
МЕГАОММЕТР Е6-40
МЕГАОММЕТР Е6-40
TOP